How to Choose a Rotating Table Mechanism
A rotating table mechanism provides 360° rotation in tables, coffee tables, single armchairs and display units. Choosing the right product requires looking at a few key criteria.
Size and load capacity
The weight the table will carry determines the size of the mechanism you should choose. Standard 26×26 cm models suit most applications; however, heavy marble tops or large units require wider, higher-capacity models.
Bearing quality
The smoothness and quietness of rotation depend directly on ball-bearing quality. A quality bearing provides years of smooth rotation without sticking.
- Light use: Coffee tables and decorative units; the standard size fits most applications.
- Medium use: Single armchairs and serving tops; the size goes up as edge loading becomes more likely.
- Heavy use: Marble tops and industrial platforms; a custom size with a wider mounting footprint is needed.
Coating type
Galvanised or chrome-plated steel structures are corrosion-resistant. In a humid room the longest-lasting answer is to stack the two: an electrostatic powder coat over galvanising. See mechanism material and coating for the detail.
If you're unsure, share your use case with us; let's determine the most suitable size and capacity for your project together.
You can review the verified technical table on the swivel mechanism page.
Frequently Asked Questions
What sizes is the rotating table mechanism made in?
The standard size is 26 × 26 cm, which suits most table, coffee-table and single-armchair applications. Other dimensions can be manufactured to project requirements.
Can a rotating mechanism be used under a marble top?
Yes; what matters is the weight of the stone and the diameter of the top. Heavy tops call for both a higher capacity and a wider seating surface, so the tendency to tip when pressed at the edge is reduced.
Should I choose galvanised or chrome coating?
Galvanising is enough for dry indoor use. If the mechanism stays visible, chrome plating or a coloured powder coat comes in. If the room is humid, do not weigh them against each other — stack them: powder coat over galvanising lasts longer than either coating alone.
Let's find the right mechanism for your project together
Browse our products or get in touch with us.
